Monday, March 23, 2015

Fuel leak fixed!

After buying my boat, there was a smell of diesel throughout the cabin areas, enough to cause clothes to smell like diesel when returning home after staying on the boat for even a couple days. I was noticing 2-3 tablespoons of fuel accumulating in the bilge under the starboard engine (Catapillar 3208, naturally aspirated) every couple of weeks. I would clean that up often, which helped keep the smell down to a tolerable level. Meanwhile, I searched for the source of the leak by carefully examining the fuel tank, fuel lines and injectors. I could not find any leaks in those areas. After taking the air filter off one day (after months of frustration), I was surprised to see a small trickle of fuel running across the manifold and down the back of the engine into the bilge. I had found the leak! After further investigation and some research online, I discovered that the problem was a leaking seal associated with the throttle shaft. Apparently that's a common problem on Catapillar 3208s. Now, I just need to fix it!

Jim Geier
Cheoy Lee Trawler 55







Friday, March 6, 2015

Teak restoration testing - TeakGuard

My Cheoy Lee has lots of teak trim around the outside of the boat, with varying levels of finish decay. I've been researching what to do with that. Some prefer not to apply any treatment to the teak and let it gray naturally. That is certainly the easiest in some cases; however, on my boat that still requires a lot of sanding to remove old finishes to make it look consistent. I also personally prefer the rich brown color that teak presents when finished, so I've been looking for a good way to make it stay looking like that. One method that I've been experimenting with is called TeakGuard, which leaves a natural brown finish with a slight sheen (not glossy and smooth like varnish). For testing purposes, I applied TeakGuard on a small section of my swim platform a year ago, and it still looks good today (see photo below). With TeakGuard, you sand the wood, use a teak cleaner, clean with water and then apply several coats of TeakGuard starting after the surface is dry. I found this process fairly easy. They say it may be necessary to apply another coat each season (which is all you need to do for maintenance), but based on the results of my swim platform test (which was subject to sun, rain and Mississippi heat), it may go a bit longer before needing a maintenance coat. Based on these results and talking to others who've used it, I'm planning to apply TeakGuard on all the outside teak.

Jim Geier
Cheoy Lee Trawler 55